Setup
Wemo Smart Plug After the Shutdown: How to Salvage Yours in 2026
Belkin's cloud shutdown killed remote access and voice control for most Wemo smart plugs, but many models can still work locally. This guide walks existing owners through model-by-model rescue options — HomeKit, Home Assistant with pyWemo, and Matterbridge — plus refund eligibility and replacement recommendations.
Wemo smart plug, model number identified, Wi-Fi network, pre-configured HomeKit or Home Assistant instance (depending on path), Python environment (for pyWemo)
On January 31, 2026, Belkin shut down the Wemo cloud. Your smart plug stopped responding to Alexa, the app wouldn't log in, and remote control died. A lot of people assumed the hardware was bricked. It wasn't. But whether you can rescue it depends on exactly one thing: the model number printed on the side of the plug. That number decides everything — and if you don't have the right setup, the fix can be a deep rabbit hole. I've been through most of these routes myself, and I'll tell you straight which ones are viable and which ones are a headache.
Check Your Model Number First
| Model | Status | Best Path | Difficulty |
|---|---|---|---|
| WSP100 (Thread) | Unaffected | Keep using HomeKit (already works) | None |
| WSP080, F7C063, WSP090 | Salvageable (if HomeKit configured before Jan 31) | HomeKit local control | Easy |
| WSP080, F7C063, WSP090 (not in HomeKit) | Salvageable but harder | Home Assistant + pyWemo | Hard |
| WSP070, F7C027, F7C029 (Insight) | Bricked for cloud/voice | Home Assistant + pyWemo | Hard |
| Any model out of warranty | No refund | Replace | N/A |
| Any model under warranty (check date) | Refund possible | Contact Belkin with proof of purchase | Easy |
According to Belkin's official support page, refunds are available for devices under warranty — but most plugs sold before 2023 are out of warranty. If your model is WSP100, you're fine — it uses Thread and never needed the cloud. If you have a HomeKit-compatible model (WSP080, F7C063, WSP090) and you set it up in HomeKit before the deadline, you can still control it locally. If you missed that window, or if you have a non-HomeKit model like WSP070 or the Insight plug (F7C029), you're looking at Home Assistant with pyWemo. That means you'll need to be comfortable at the command line — the UPnP auto-discovery only works if the plug is already on your Wi-Fi. A factory-reset plug can't be reconnected without pyWemo's Wi-Fi provisioning, and that step trips up a lot of people. Matterbridge voice control is an option, but it requires a working Home Assistant instance first; it's not a standalone rescue. Be honest with yourself about your technical comfort before you decide to tinker or replace.
Report a step that didn't work
Tell us which step failed and on what firmware or app version — we re-verify before changing the recipe.